XYPLEX MINIMAL MIB 21 Oct 91 Definitions of Minimal Managed Objects for Xyplex Terminal Servers 21 October 1991 Xyplex Document Number 420-0333-B Xyplex, Inc. 330 Codman Hill Road Boxborough, MA 01719 (508) 264-9900 support@xyplex.com 1. Status of this Memo This document is submitted to the Internet MIB repository and to Xyplex users as a Xyplex private extension to the SNMP MIB. Distribution of this memo is unlimited. Please express comments to Xyplex. 2. Abstract This memo defines a private portion of the Management Information Base (MIB), within the Xyplex branch, for use with SNMP over various transport services, such as UDP or Ethernet. In particular, it defines objects for minimal Xyplex [Page 1] XYPLEX MINIMAL MIB 21 Oct 91 management of a Xyplex terminal server. This memo does not specify a standard for the Internet community. It describes an implementation in certain Xyplex products. Xyplex [Page 2] XYPLEX MINIMAL MIB 21 Oct 91 3. Historical Perspective As reported in RFC 1052, IAB Recommendations for the Development of Internet Network Management Standards [1], a two-prong strategy for network management of TCP/IP-based internets was undertaken. In the short-term, the Simple Network Management Protocol (SNMP), defined in RFC 1067, was to be used to manage nodes in the Internet community. In the long-term, the use of the OSI network management framework was to be examined. Two documents were produced to define the management information: RFC 1065, which defined the Structure of Management Information (SMI), and RFC 1066, which defined the Management Information Base (MIB). Both of these documents were designed so as to be compatible with both the SNMP and the OSI network management framework. This strategy was quite successful in the short-term: Internet-based network management technology was fielded, by both the research and commercial communities, within a few months. As a result of this, portions of the Internet community became network manageable in a timely fashion. As reported in RFC 1109, Report of the Second Ad Hoc Network Management Review Group [2], the requirements of the SNMP and the OSI network management frameworks were more different than anticipated. As such, the requirement for compatibility between the SMI/MIB and both frameworks was suspended. This action permitted the operational network management framework, based on the SNMP, to respond to new operational needs in the Internet community by producing MIB-II. In May of 1990, the core documents were elevated to "Standard Protocols" with "Recommended" status. As such, the Internet- standard network management framework consists of: Structure and Identification of Management Information for TCP/IP-based internets, RFC 1155 [4], which describes how managed objects contained in the MIB are defined; Management Information Base for Network Management of TCP/IP-based internets, which describes the managed objects contained in the MIB, RFC 1156 [5]; and, the Simple Network Management Protocol, RFC 1157 [6], which defines the protocol used to manage these objects. Consistent with the IAB directive to produce simple, Xyplex [Page 3] XYPLEX MINIMAL MIB 21 Oct 91 workable systems in the short-term, the list of managed objects defined in the Internet-standard MIB was derived by taking only those elements which are considered essential. However, the SMI defined three extensibility mechanisms: one, the addition of new standard objects through the definitions of new versions of the MIB; two, the addition of widely-available but non- standard objects through the experimental subtree; and three, the addition of private objects through the enterprises subtree. Such additional objects can not only be used for vendor-specific elements, but also for experimentation as required to further the knowledge of which other objects are essential. This memo defines extensions to the MIB using the third method. It contains definitions of managed objects in various Xyplex products as specified in [10]. Xyplex [Page 4] XYPLEX MINIMAL MIB 21 Oct 91 4. Objects Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) [7] defined in the SMI. In particular, each object has a name, a syntax, and an encoding. The name is an object identifier, an administratively assigned name, which specifies an object type. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the OBJECT DESCRIPTOR, to also refer to the object type. The syntax of an object type defines the abstract data structure corresponding to that object type. The ASN.1 language is used for this purpose. However, the SMI [4] purposely restricts the ASN.1 constructs which may be used. These restrictions are explicitly made for simplicity. The encoding of an object type is simply how that object type is represented using the object type's syntax. Implicitly tied to the notion of an object type's syntax and encoding is how the object type is represented when being transmitted on the network. The SMI specifies the use of the basic encoding rules of ASN.1 [8], subject to the additional requirements imposed by the SNMP. 4.1. Format of Definitions Section 6 contains the specification of all object types contained in this MIB module. The object types are defined using the conventions defined in the SMI, as amended by the extensions specified in [9]. Xyplex [Page 5] XYPLEX MINIMAL MIB 21 Oct 91 5. Overview The Xyplex Minimal MIB applies to Xyplex systems with terminal ports, such as a terminal server. It contains relatively few objects, selected as those most important for management of a terminal port. Future Xyplex products are expected to have considerably expanded MIBs. The MIB comprises three groups of information: the System group, the Character group, and the Internet group. As a convenience for the reader, the following descriptions contain lists of the objects in each group. The System group contains information common to all Xyplex systems. It contains one base object, namely: sysIdent The Character group contains information for the management of character stream (that is, terminal or printer) ports. It comprises one base object and three tables. The Physical Character Port table contains information for each physical port. The Physical Character Input Signal table contains information on hardware connector input signals. The Physical Character Output Signal table contains information on hardware connector output signals. The Character group base object is: charPhysNumber The objects composing a Physical Character Port entry are: charPhysIndex charPhysPortName charPhysAdminAccess charPhysOperAccess charPhysBits charPhysParity charPhysSpeed charPhysModemControl charPhysSignalType charPhysInSignalNumber charPhysOutSignalNumber charPhysFlowControl charPhysInFlow Xyplex [Page 6] XYPLEX MINIMAL MIB 21 Oct 91 charPhysOutFlow charPhysInFlowState charPhysOutFlowState charPhysAutobaud charPhysInCharacters charPhysOutCharacters charPhysFramingErrors charPhysParityErrors charPhysOverrunErrors charPhysLastInCharacter charPhysLastOutCharacter charPhysNode charPhysUserName The objects composing a Physical Character Input Signal entry are: charInPhysIndex charInSignalName charInSignalState The objects composing a Physical Character Output Signal entry are: charOutPhysIndex charOutSignalName charOutSignalState The Internet group contains information for the system's Internet connection, where such information is not available from the standard SNMP MIB. It comprises several base objects, namely: intDomainSuffix intDomainAddress1 intDomainAddress2 intGatewayAddress1 intGatewayAddress2 Xyplex [Page 7] XYPLEX MINIMAL MIB 21 Oct 91 6. Definitions XYPLEX-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, Counter, TimeTicks FROM RFC1155-SMI DisplayString FROM RFC1158-MIB OBJECT-TYPE FROM RFC-oooo; xyplex OBJECT IDENTIFIER ::= { enterprises 33 } system OBJECT IDENTIFIER ::= { xyplex 1 } character OBJECT IDENTIFIER ::= { xyplex 2 } xInternet OBJECT IDENTIFIER ::= { xyplex 4 } -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9] -- this is the private MIB module for Xyplex systems Xyplex [Page 8] XYPLEX MINIMAL MIB 21 Oct 91 -- the System group -- Implementation of this group is mandatory for all Xyplex -- systems sysIdent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "An identification string for local and remote server displays. Corresponds directly to SERVER IDENTIFICATION and the value labeled 'Identification:' on the SERVER CHARACTERISTICS display." ::= { system 1 } Xyplex [Page 9] XYPLEX MINIMAL MIB 21 Oct 91 -- the Character group -- Implementation of this group is mandatory for all Xyplex -- systems with character stream physical ports charPhysNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of physical character (terminal) ports (regardless of their current state) present on this system." ::= { character 1 } Xyplex [Page 10] XYPLEX MINIMAL MIB 21 Oct 91 -- the Physical Character Port table charPhysTable OBJECT-TYPE SYNTAX SEQUENCE OF CharPhysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of physical character port entries. The number of entries is given by the value of charPhysNumber." ::= { character 2 } charPhysEntry OBJECT-TYPE SYNTAX CharPhysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and parameter values for a physical character port." INDEX { charPhysIndex } ::= { charPhysTable 1 } CharPhysEntry ::= SEQUENCE { charPhysIndex INTEGER, charPhysPortName DisplayString, charPhysAdminAccess INTEGER, charPhysOperAccess INTEGER, charPhysBits INTEGER, charPhysParity INTEGER, charPhysSpeed INTEGER, charPhysModemControl INTEGER, charPhysSignalType INTEGER, charPhysInSignalNumber INTEGER, charPhysOutSignalNumber INTEGER, Xyplex [Page 11] XYPLEX MINIMAL MIB 21 Oct 91 charPhysFlowControl INTEGER, charPhysInFlow INTEGER, charPhysOutFlow INTEGER, charPhysInFlowState INTEGER, charPhysOutFlowState INTEGER, charPhysAutobaud INTEGER, charPhysInCharacters Counter, charPhysOutCharacters Counter, charPhysFramingErrors Counter, charPhysParityErrors Counter, charPhysOverrunErrors Counter, charPhysLastInCharacter INTEGER, charPhysLastOutCharacter INTEGER, charPhysNode DisplayString, charPhysUserName DisplayString } charPhysIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each physical character port, directly corresponding to the physical connector. Its value ranges between 1 and the value of charPhysNumber." ::= { charPhysEntry 1 } charPhysPortName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write Xyplex [Page 12] XYPLEX MINIMAL MIB 21 Oct 91 STATUS mandatory DESCRIPTION "An administratively-assigned name for the port. If set to zero length, it becomes the standard, default name. Corresponds directly to PORT NAME and the value labeled 'Name:' in the PORT CHARACTERISTICS display." ::= { charPhysEntry 2 } charPhysAdminAccess OBJECT-TYPE SYNTAX INTEGER { none(1), dynamic(2), local(3), remote(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The allowed mode of access to the port. The value meanings are: none not accessed dynamic local or remote access local local access only remote remote access only Corresponds directly to PORT ACCESS and the value labeled 'Access:' in the PORT CHARACTERISTICS display." ::= { charPhysEntry 3 } charPhysOperAccess OBJECT-TYPE SYNTAX INTEGER { none(1), local(3), remote(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current mode of access to the port. none not accessed local local access remote remote access Corresponds directly to the value labeled 'Access:' in the PORT STATUS display." ::= { charPhysEntry 4 } charPhysBits OBJECT-TYPE SYNTAX INTEGER (7..8) ACCESS read-write Xyplex [Page 13] XYPLEX MINIMAL MIB 21 Oct 91 STATUS mandatory DESCRIPTION "The port's number of bits per character. Corresponds directly to PORT CHARACTER SIZE and the value labeled 'Character Size:' in the PORT CHARACTERISTICS display." ::= { charPhysEntry 5 } charPhysParity OBJECT-TYPE SYNTAX INTEGER { none(1), even(2), mark(3), odd(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of character parity the port provides and expects. The value meanings are: none ignored and not generated even an even number of 1s mark always 1 odd an odd number of 1s Corresponds directly to PORT PARITY and the value labeled 'Parity:' in the PORT CHARACTERISTICS display." ::= { charPhysEntry 6 } charPhysSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port's nominal bandwidth in bits per second. Corresponds directly to PORT SPEED and the value labeled 'Input Speed:' or 'Output Speed:' in the PORT CHARACTERISTICS display." ::= { charPhysEntry 7 } charPhysModemControl OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A control to enable or disable observation of modem control signals. Corresponds directly to PORT MODEM CONTROL and the value labeled 'Modem Control:' in the PORT CHARACTERISTICS display." Xyplex [Page 14] XYPLEX MINIMAL MIB 21 Oct 91 ::= { charPhysEntry 8 } charPhysSignalType OBJECT-TYPE SYNTAX INTEGER { rs232(1), centronics(2), dataproducts(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The port's type of hardware interface. For RS-232 ports, this is assumed. For parallel ports, it corresponds directly to the value labeled 'Printer Interface:' in the PORT STATUS display." ::= { charPhysEntry 9 } charPhysInSignalNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hardware interface signals this port is capable of observing, indicating the number of entries for this port in charPhysInSignalTable. Corresponds directly to the possible values labeled 'Input Signals:' in the PORT STATUS display." ::= { charPhysEntry 10 } charPhysOutSignalNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hardware interface signals this port is capable of asserting, indicating the number of entries for this port in charPhysOutSignalTable. Corresponds directly to the possible values labeled 'Output Signals:' in the PORT STATUS display." ::= { charPhysEntry 11 } charPhysFlowControl OBJECT-TYPE SYNTAX INTEGER { none(1), cts(2), dsr(3), xon(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of flow control the system applies to the port for input and output. The value meanings are: Xyplex [Page 15] XYPLEX MINIMAL MIB 21 Oct 91 none no flow control cts CTS/RTS dsr DCD/DTR/DSR xon XON/XOFF Directly related to PORT FLOW CONTROL and the value labeled 'Flow Control:' in the PORT CHARACTERISTICS display." ::= { charPhysEntry 12 } charPhysInFlow OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A control for application of flow control to characters coming into the port. Corresponds directly to 'Input Flow Control' in the 'Enabled Characteristics' section of the PORT CHARACTERISTICS display." ::= { charPhysEntry 13 } charPhysOutFlow OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A control for observation of flow control on characters going out of the port. Corresponds directly to 'Output Flow Control' in the 'Enabled Characteristics' section of the PORT CHARACTERISTICS display." ::= { charPhysEntry 14 } charPhysInFlowState OBJECT-TYPE SYNTAX INTEGER { go(1), stop(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The dynamic state of flow control as applied by the system to characters coming into the port. Corresponds directly to the value labeled 'Input XOFFed:' in the PORT STATUS display." ::= { charPhysEntry 15 } charPhysOutFlowState OBJECT-TYPE Xyplex [Page 16] XYPLEX MINIMAL MIB 21 Oct 91 SYNTAX INTEGER { go(1), stop(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The dynamic state of flow control as observed by the system on characters going out of the port. Corresponds directly to the value labeled 'Output XOFFed:' in the PORT STATUS display." ::= { charPhysEntry 16 } charPhysAutobaud OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A control to allow the port to determine speed dynamically by looking for carriage return input characters. Corresponds directly to 'Autobaud' in the 'Enabled Characteristics' section of the PORT CHARACTERISTICS display." ::= { charPhysEntry 17 } charPhysInCharacters OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of characters that have come into the port. Corresponds directly to the value labeled 'Input Count:' in the PORT COUNTERS display." ::= { charPhysEntry 18 } charPhysOutCharacters OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of characters that have gone out of the port. Corresponds directly to the value labeled 'Output Count:' in the PORT COUNTERS display." ::= { charPhysEntry 19 } charPhysFramingErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only Xyplex [Page 17] XYPLEX MINIMAL MIB 21 Oct 91 STATUS mandatory DESCRIPTION "The total number of characters that have come into the port with illegally formatted bit frames. Corresponds directly to the value labeled 'Framing Errors:' in the PORT COUNTERS display." ::= { charPhysEntry 20 } charPhysParityErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of characters that have come into the port with invalid parity. Corresponds directly to the value labeled 'Parity Errors:' in the PORT COUNTERS display." ::= { charPhysEntry 21 } charPhysOverrunErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of characters coming into the port that the system lost due to no room in the port's input buffer. Corresponds directly to the value labeled 'Overrun Errors:' in the PORT COUNTERS display." ::= { charPhysEntry 22 } charPhysLastInCharacter OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The character that most recently came into the port. Corresponds directly to the value labeled 'Last Char Input:' in the PORT STATUS display." ::= { charPhysEntry 23 } charPhysLastOutCharacter OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION Xyplex [Page 18] XYPLEX MINIMAL MIB 21 Oct 91 "The character that most recently went out of the port. Corresponds directly to the value labeled 'Last Char Output:' in the PORT STATUS display." ::= { charPhysEntry 24 } charPhysNode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "An identification for the network system with the current, active network connection to the port. Corresponds directly to the value labeled 'Current Node:' in the PORT STATUS display." ::= { charPhysEntry 25 } charPhysUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "An identification of the user logged into the port on the current, active network connection to the port. Corresponds directly to the value following 'Port n:' in the PORT STATUS display." ::= { charPhysEntry 26 } Xyplex [Page 19] XYPLEX MINIMAL MIB 21 Oct 91 -- the Physical Character Input Signal table charPhysInSignalTable OBJECT-TYPE SYNTAX SEQUENCE OF CharPhysInSignalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of physical character port input hardware signal entries. The number of entries is given by the value of charPhysInSignalNumber" ::= { character 3 } charPhysInSignalEntry OBJECT-TYPE SYNTAX CharPhysInSignalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A physical character port hardware signal entry containing objects for the particular signal on the particular port." INDEX { charInPhysIndex, charInSignalName } ::= { charPhysInSignalTable 1 } CharPhysInSignalEntry ::= SEQUENCE { charInPhysIndex INTEGER, charInSignalName DisplayString, charInSignalState INTEGER } charInPhysIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value that uniquely identifies the physical character port to which this signal belongs. The port identified by a particular value of this index is the same port as identified by the same value of charPhysIndex." ::= { charPhysInSignalEntry 1 } -- The possible signal names for RS-232 signals are: DCD, Xyplex [Page 20] XYPLEX MINIMAL MIB 21 Oct 91 -- DTR, DSR, CTS, RTS, and RNG. -- The possible signal names for Centronics and Data -- Products signals are: Fault, Power, PaperOut, Busy, -- and Online. charInSignalName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the hardware signal, as appropriate to its type." ::= { charPhysInSignalEntry 2 } charInSignalState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the signal. For RS-232 ports, corresponds directly to the value labeled 'Input Signals:' in the PORT STATUS display. For printer ports, corresponds to the various signal labels and values following the label 'Printer Interface:' in the PORT STATUS display." ::= { charPhysInSignalEntry 3 } Xyplex [Page 21] XYPLEX MINIMAL MIB 21 Oct 91 -- the Physical Character Output Signal table charPhysOutSignalTable OBJECT-TYPE SYNTAX SEQUENCE OF CharPhysOutSignalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of physical character port output hardware signal entries. The number of entries is given by the value of charPhysOutSignalNumber" ::= { character 4 } charPhysOutSignalEntry OBJECT-TYPE SYNTAX CharPhysOutSignalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A physical character port hardware signal entry containing objects for the particular signal on the particular port." INDEX { charOutPhysIndex, charOutSignalName } ::= { charPhysOutSignalTable 1 } CharPhysOutSignalEntry ::= SEQUENCE { charOutPhysIndex INTEGER, charOutSignalName DisplayString, charOutSignalState INTEGER } charOutPhysIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value that uniquely identifies the physical character port to which this signal belongs. The port identified by a particular value of this index is the same port as identified by the same value of charPhysIndex." ::= { charPhysOutSignalEntry 1 } -- The possible signal names for RS-232 signals are: DCD, Xyplex [Page 22] XYPLEX MINIMAL MIB 21 Oct 91 -- DTR, DSR, CTS, RTS, and RNG. -- The possible signal names for Centronics and Data -- Products signals are: Fault, Power, PaperOut, Busy, -- and Online. charOutSignalName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the hardware signal, as appropriate to its type." ::= { charPhysOutSignalEntry 2 } charOutSignalState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the signal. For RS-232 ports, corresponds directly to the value labeled 'Output Signals:' in the PORT STATUS display. For printer ports, corresponds to the various signal labels and values following the label 'Printer Interface:' in the PORT STATUS display." ::= { charPhysOutSignalEntry 3 } Xyplex [Page 23] XYPLEX MINIMAL MIB 21 Oct 91 -- the Internet group -- Implementation of this group is mandatory for all Xyplex -- systems that implement Internet protocols intDomainSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..115)) ACCESS read-write STATUS mandatory DESCRIPTION "A partial domain name for the server to append to the end of an incomplete domain name provided by the user. Corresponds directly to SERVER INTERNET DEFAULT DOMAIN SUFFIX and the value labeled 'Domain Suffix:' in the SERVER INTERNET CHARACTERISTICS display." ::= { xInternet 1 } intDomainAddress1 OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY DOMAIN ADDRESS and the value labeled 'Primary Domain Address:' in the SERVER INTERNET CHARACTERISTICS display." ::= { xInternet 2 } intDomainAddress2 OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECONDARY DOMAIN ADDRESS and the value labeled 'Secondary Domain Address:' in the SERVER INTERNET CHARACTERISTICS display." ::= { xInternet 3 } Xyplex [Page 24] XYPLEX MINIMAL MIB 21 Oct 91 intGatewayAddress1 OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The internet address of the system's primary (first choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY GATEWAY ADDRESS and the value labeled 'Primary Gateway Address:' in the SERVER INTERNET CHARACTERISTICS display." ::= { xInternet 4 } intGatewayAddress2 OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The internet address of the system's secondary (second choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECONDARY GATEWAY ADDRESS and the value labeled 'Secondary Gateway Address:' in the SERVER INTERNET CHARACTERISTICS display." ::= { xInternet 5 } END Xyplex [Page 25] XYPLEX MINIMAL MIB 21 Oct 91 7. References [1] V. Cerf, IAB Recommendations for the Development of Internet Network Management Standards. Internet Working Group Request for Comments 1052. Network Information Center, SRI International, Menlo Park, California, (April, 1988). [2] V. Cerf, Report of the Second Ad Hoc Network Management Review Group, Internet Working Group Request for Comments 1109. Network Information Center, SRI International, Menlo Park, California, (August, 1989). [3] M.T. Rose (editor), Management Information Base for Network Management of TCP/IP-based internets, Internet Working Group Request for Comments 1158. Network Information Center, SRI International, Menlo Park, California, (May, 1990). [4] M.T. Rose and K. McCloghrie, Structure and Identification of Management Information for TCP/IP-based internets, Internet Working Group Request for Comments 1155. Network Information Center, SRI International, Menlo Park, California, (May, 1990). [5] K. McCloghrie and M.T. Rose, Management Information Base for Network Management of TCP/IP-based internets, Internet Working Group Request for Comments 1156. Network Information Center, SRI International, Menlo Park, California, (May, 1990). [6] J.D. Case, M.S. Fedor, M.L. Schoffstall, and J.R. Davin, Simple Network Management Protocol, Internet Working Group Request for Comments 1157. Network Information Center, SRI International, Menlo Park, California, (May, 1990). [7] Information processing systems - Open Systems Interconnection - Specification of Abstract Syntax Notation One (ASN.1), International Organization for Standardization. International Standard 8824, (December, 1987). [8] Information processing systems - Open Systems Interconnection - Specification of Basic Encoding Rules for Abstract Notation One (ASN.1), International Organization for Standardization. International Standard 8825, Xyplex [Page 26] XYPLEX MINIMAL MIB 21 Oct 91 (December, 1987). [9] M.T. Rose, K. McCloghrie (editors), Towards Concise MIB Definitions, Internet Draft, Internet Engineering Task Force, (September, 1990). [10] B. Stewart, Xyplex MIB Extension Architectural Specification, Xyplex document number 420-0332, (4 September 1990). Xyplex [Page 27]