SCC-RAID7-MIB DEFINITIONS ::= BEGIN -- -- Definitions of Managed Objects for Storage Computer Corporation -- RAID7 Objects -- -- Name: sccraid7-mib-v1-0.txt -- Version: 1.0 -- Date: -- Company: Storage Computer Corporation -- Mail: raid7@world.std.com -- -- -- Inquiries about the contents and use of this MIB may be sent to -- raid7@world.std.com -- -- -- The objects defined in this MIB are located under the -- private.enterprises subtree as shown below: -- -- iso(1).org(3).dod(6).internet(1) -- | -- private(4) -- | -- enterprises(1) -- | -- scc(1386) -- | -- ._______________.________________. -- | | -- products(1) sccMibs(2) -- | | -- | .___________.___________. -- | | | -- raid7(1) raid7proxy(2) -- -- -- -- All objects within this MIB are prefixed with the OBJECT IDENTIFIER -- -- iso(1).org(3).dod(6).internet(1).private(4).enterprises(1). -- scc(1386).sccMibs(2).raid7(1) -- -- or, 1.3.6.1.4.1.1386.2.1 -- -- The present implementation of these objects is in a proxy agent; -- information on the status of the system/proxy communication is -- available in the companion mib 'scc-raid7-proxy-mib-v1-0.txt' -- IMPORTS Counter, Gauge, IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 DisplayString FROM RFC1213-MIB raid7mib FROM SCC-ENTERPRISE-MIB; -- Groups within this MIB. raid7Sys OBJECT IDENTIFIER ::= { raid7mib 1 } raid7Memory OBJECT IDENTIFIER ::= { raid7mib 2 } raid7Host OBJECT IDENTIFIER ::= { raid7mib 3 } raid7Drive OBJECT IDENTIFIER ::= { raid7mib 4 } raid7Env OBJECT IDENTIFIER ::= { raid7mib 5 } -- -- System Group -- -- -- raid7SysVersion OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Describes the revision level of the running RAID7 Operating System; this is not really an IP address - but the revision is expressed as 4 decimal numbers so the IpAddress type is convenient." ::= { raid7Sys 1 } raid7TotalMem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of kilobytes of memory present" ::= { raid7Memory 1 } raid7GoodMem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of kilobytes of memory judged good by self-test" ::= { raid7Memory 2 } raid7MemAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of kilobytes of memory currently in use." ::= { raid7Memory 3 } raid7CacheHitPercent OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The system-wide percentage of operations satisfied from the RAID7 system cache. This does not include any operations satisfied from cache in channel adapters, or cache built into the physical drives." ::= { raid7Memory 4 } -- -- The Block Size table -- -- raid7BlockTable OBJECT-TYPE SYNTAX SEQUENCE OF Raid7BlockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table shows how the host transfer block sizes have been distributed - it can be used to tune system performance (see the RAID 7 User Guide)." ::= { raid7Memory 5 } raid7BlockEntry OBJECT-TYPE SYNTAX Raid7BlockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information specific to blocks of a given size." INDEX { raid7BlockSize } ::= { raid7BlockTable 1 } Raid7BlockEntry ::= SEQUENCE { raid7BlockSize INTEGER, raid7NumBlocks Gauge } raid7BlockSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Size of the blocks." ::= { raid7BlockEntry 1 } raid7NumBlocks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of blocks of this size." ::= { raid7BlockEntry 2 } -- -- The Host Channel Group -- -- This group provides information on the Host I/O channels installed -- in the RAID7 -- raid7NumHostChannels OBJECT-TYPE SYNTAX INTEGER (1..12) ACCESS read-only STATUS mandatory DESCRIPTION "The number of functional Host I/O Channels." ::= { raid7Host 1 } raid7ChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF Raid7ChannelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table describing each of the Host I/O Channels" ::= { raid7Host 2 } raid7ChannelEntry OBJECT-TYPE SYNTAX Raid7ChannelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information specific to a given Host I/O Channel" INDEX { raid7ChannelNumber } ::= { raid7ChannelTable 1 } Raid7ChannelEntry ::= SEQUENCE { raid7ChannelNumber INTEGER, raid7ChannelTransferRate Gauge, raid7ChannelTransactionRate Gauge, raid7ChannelErrorMsgs Counter, raid7ChannelLastKey INTEGER, raid7ChannelLastSense INTEGER } raid7ChannelNumber OBJECT-TYPE SYNTAX INTEGER (1..12) ACCESS read-only STATUS mandatory DESCRIPTION "The number of this Host I/O Channel" ::= { raid7ChannelEntry 1 } raid7ChannelTransferRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A measure of the data transfer speed on this channel during recent transfers (does not include the idle time on the channel between transfers in the calculation)." ::= { raid7ChannelEntry 2 } raid7ChannelTransactionRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A measure of the number I/O operations per second on this channel." ::= { raid7ChannelEntry 3 } raid7ChannelErrorMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of error messages on this channel; see the RAID7 console and the User Guide." ::= { raid7ChannelEntry 4 } raid7ChannelLastKey OBJECT-TYPE SYNTAX INTEGER { noSense(0), recoveredError(1), notReady(2), mediumError(3), hardwareError(4), illegalRequest(5), unitAttention(6), abortedCommand(11), miscompare(14) } ACCESS read-only STATUS mandatory DESCRIPTION "The most recently reported SCSI Key value" ::= { raid7ChannelEntry 5 } raid7ChannelLastSense OBJECT-TYPE SYNTAX INTEGER { noAddSense(0), noIndexSectSignal(1), noSeekComplete(2), writeFault(3), driveNotReady(4), communicationFailure(8), writeError(12), readError(17), retries(23), retriesAndECC(24), listLengthError(26), syncError(27), defectListNotFound(28), verifyMiscompare(29), invalidCommand(32), invalidBlockAddress(33), illegalFunction(34), invalidFieldCDB(36), invalidLUN(37), invalidField(38), resetCondition(41), initClearQ(47), mediaFormat(49), invalidIdentify(61), diagnosticFailure(64), messageRejectError(67), internalFailure(68), selectFailure(69), parityError(70), initiatorDetectedError(72), illegalMessage(73) } ACCESS read-only STATUS mandatory DESCRIPTION "The last SCSI Sense reported." ::= { raid7ChannelEntry 6 } -- -- The Drive Group -- -- This group provides information on the physical disk drives installed -- in the RAID7 -- raid7NumDrives OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of drives installed in the RAID7 system" ::= { raid7Drive 1 } raid7NumDataDrives OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of drives being used as data drives; this may not be equal to the total of the drives in the following objects." ::= { raid7Drive 2 } raid7NumParityDrives OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of drives being used to store parity information." ::= { raid7Drive 3 } raid7NumStandbyDrives OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of drives available for reconstructing data from a failed drive." ::= { raid7Drive 4 } raid7NumFailedDrives OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of drives whos raid7DriveState is either reconstructing or failed." ::= { raid7Drive 5 } raid7DriveTable OBJECT-TYPE SYNTAX SEQUENCE OF Raid7DriveEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of drive entries, one for each physical drive; this may be a sparse table." ::= { raid7Drive 6 } raid7DriveEntry OBJECT-TYPE SYNTAX Raid7DriveEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information specific to a single drive." INDEX { raid7DriveNumber } ::= { raid7DriveTable 1 } Raid7DriveEntry ::= SEQUENCE { raid7DriveNumber INTEGER, raid7DriveState INTEGER, raid7DriveActivity DisplayString (SIZE (1)), raid7DriveWrites Counter, raid7DriveReads Counter, raid7DriveTimeOuts Counter, raid7DriveErrors Counter } raid7DriveNumber OBJECT-TYPE SYNTAX INTEGER (1..48) ACCESS read-only STATUS mandatory DESCRIPTION "Drive number of this drive." ::= { raid7DriveEntry 1 } raid7DriveState OBJECT-TYPE SYNTAX INTEGER { data(1), parity(2), standby(3), rebuilding(4), reformatting(5), failed(6), dataAndParity(7), unknown(8) } ACCESS read-only STATUS mandatory DESCRIPTION "State of this drive." ::= { raid7DriveEntry 2 } raid7DriveActivity OBJECT-TYPE SYNTAX DisplayString (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "This is letter indicating the most recent operation reported for the drive. See the RAID7 User Guide for values and thier meanings." ::= { raid7DriveEntry 3 } raid7DriveWrites OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of write operations to this drive." ::= { raid7DriveEntry 4 } raid7DriveReads OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of read operations to this drive; does not include operations satisfied from RAID7 system or channel cache, but does include those satisfied from any cache within the drive." ::= { raid7DriveEntry 5 } raid7DriveTimeOuts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SCSI operations timed out on the drive." ::= { raid7DriveEntry 6 } raid7DriveErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of errors reported by the drive" ::= { raid7DriveEntry 7 } raid7DriveUp TRAP-TYPE ENTERPRISE raid7mib VARIABLES { raid7DriveNumber, raid7DriveState } DESCRIPTION "This trap is sent whenever the state for a drive changes to data or parity from any other value. An equivalent poll would be to poll raid7NumberDrives and raid7FailedDrives and then read the raid7DriveTable when one of them changes." ::= 1 raid7DriveDown TRAP-TYPE ENTERPRISE raid7mib VARIABLES { raid7DriveNumber, raid7DriveState } DESCRIPTION "This trap is sent whenever the state for a drive changes from data or parity to any other value. An equivalent poll would be to poll raid7NumberDrives and raid7FailedDrives and then read the raid7DriveTable when one of them changes." ::= 2 -- -- Environment Group -- -- This group provides the objects needed to monitor the power and fan -- status for the RAID7 system. -- raid7EnvironmentStatus OBJECT-TYPE SYNTAX INTEGER { operational(1), failure(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The 'failure' indicates that one or more power supplies or fans in the unit have failed." ::= { raid7Env 1 } raid7EnvironmentFailure TRAP-TYPE ENTERPRISE raid7mib VARIABLES { raid7EnvironmentStatus } DESCRIPTION "This trap is sent when the value of raid7EnvironmentStatus changes to failure." ::= 3 END