Use Case 07: Power and sample size calculations allowing for spillover

Contamination between the arms of a trial leads to downward bias in the estimates of efficacy In the case of malaria, this spillover is mainly caused by mosquito movement, and is therefore expected to be greatest near to the boundary between the trial arms.

Because the effective distance over which substantial spillover occurs is generally not known, sensitivity analyses must be used to get an idea of how great these effects are likely to be. The following workflow, similar to that used for Use Case 3, explores the likely bias and loss of power for one specific simulated setting.

In this simple example, spatially homogeneous background disease rates are assigned, using propensity <- 1 A small number of simulations is specified for testing (here 2, a much larger number, at least several thousands is used for the definitive analysis). In this example, a fixed value for the outcome in the control arm, the target ICC of the simulations, and the number of clusters in each arm of the trial. input. Efficacy is sampled from a uniform(0, 0.6) distribution, and the simulated spillover interval from a uniform(0, 1.5km) distribution.

library(CRTspat)
# The locations only are taken from the example dataset. The cluster, arm, and outcome assignments are replaced
example <- readdata("exampleCRT.txt")
trial <- example$trial[ , c("x","y", "denom")]
trial$propensity <- 1
nsimulations <- 2
CRT <- CRTsp(trial)
library(dplyr)
outcome0 <- 0.4
ICC <- 0.05
c <- 25
set.seed(7)
effect <- runif(nsimulations,0,0.6)
# Data frame of input spillover interval
spillover_interval <- runif(nsimulations, min = 0, max = 1.5)
input <- data.frame(effect = effect, spillover_interval = spillover_interval)

CRTscenario7 <- function(input) {
      ex <- specify_clusters(CRT, c = c, algo = "kmeans") %>%
        randomizeCRT() %>%
        simulateCRT(effect = input[["effect"]], generateBaseline = FALSE, outcome0 = outcome0,
                    ICC_inp = ICC, spillover_interval = input[["spillover_interval"]],
                    matchedPair = FALSE, scale = "proportion", denominator = "denom", tol = 0.01)
    sd <- spillover_interval/(2 * qnorm(0.975))
    contaminate_pop_pr_input <- sum(abs(ex$trial$nearestDiscord) <
              0.5 * input[["spillover_interval"]])/nrow(ex$trial)
    contaminate_pop_pr_sd <- sum(abs(ex$trial$nearestDiscord) <
              input[["spillover_interval"]]/(2 * qnorm(0.975)))/nrow(ex$trial)
    examplePower = CRTpower(trial = ex, desiredPower = 0.8,
                           effect=input[["effect"]], yC=outcome0, outcome_type = 'd', ICC = ICC, c = c)
    nominalpower <-  examplePower$geom_full$power
    Tanalysis <- CRTanalysis(ex, method = "T")
    value <- c(
      effect = input[["effect"]],
      contaminate_pop_pr_input = contaminate_pop_pr_input,
      contaminate_pop_pr_sd = contaminate_pop_pr_sd,
      spillover_interval = input[["spillover_interval"]],
      nominalpower = examplePower$geom_full$power,
      Pvalue_t = Tanalysis$pt_ests$p.value,
      effect_size_t = Tanalysis$pt_ests$effect_size)
  return(value)
}

The results are collected in a data frame and post-processed to classify the outcomes according to whether they represent either Type I errors or Type II errors

results_matrix <- apply(input, MARGIN = 1,  FUN = CRTscenario7)
results <- as.data.frame(t(results_matrix))

results$significant_t <- ifelse((results$Pvalue_t < 0.05), 1, 0)
results$typeIerror <- ifelse(results$significant_t == 1 & results$effect == 0, 1,
                             ifelse(results$effect == 0, 0 , NA))
results$typeIIerror <- ifelse(results$significant_t == 0, ifelse(results$effect > 0, 1, NA), 0)
results$bias_t <- with(results, ifelse(significant_t,effect_size_t - effect,- effect))

Analysis by simulated true efficacy

The results are grouped by ranges of efficacy, for each of which the ratio of the number of simulations giving statistically significant results to the expected number can be calculated.

results$effect_cat <- factor(round(results$effect*10))
by_effect <- results[results$effect > 0, ] %>%
  group_by(effect_cat) %>%
  summarise_at(c("effect","significant_t", "nominalpower", "bias_t", "typeIIerror"),
               mean, na.rm = TRUE)
by_effect$power_ratio <- with(by_effect, significant_t/nominalpower)

library(ggplot2)
theme_set(theme_bw(base_size = 14))
ggplot(data = by_effect, aes(x = effect)) +
  geom_smooth(aes(y = power_ratio), color = "#b2df8a",se = FALSE) +
  geom_smooth(aes(y = typeIIerror), color = "#D55E00",se = FALSE) +
  geom_smooth(aes(y = bias_t), color = "#0072A7",se = FALSE) +
  xlab('Simulated efficacy (%)') +
  ylab('Performance of t-test')

Despite the spillover, the t-test performs similarly to expectations across the range of efficacies investigated (Figure 7.1)

Fig 7.1 Performance of t-test by efficacy \(\color{purple}{\textbf{----}}\) : ratio of power:nominal power; \(\color{green}{\textbf{----}}\) :type II error rate; \(\color{blue}{\textbf{----}}\) : bias.

Analysis by simulated spillover interval

An analogous analysis, to that of performance relative to efficacy, can be carried out to explore the effect of the simulated spillover interval.

ggplot(data = results, aes(x = spillover_interval)) +
  geom_smooth(aes(y = contaminate_pop_pr_input), color = "#b2df8a",se = FALSE, size = 2) +
  geom_smooth(aes(y = contaminate_pop_pr_sd), color = "#0072A7",se = FALSE, size = 2) +
  xlab('Simulated spillover interval (km)') +
  ylab('Proportion of the locations')

results$theta_cat <- factor(round(results$spillover_interval*10))
by_theta <- results[results$effect > 0, ] %>%
  group_by(theta_cat) %>%
  summarise_at(c("spillover_interval","significant_t", "nominalpower", "bias_t", "typeIIerror"),
               mean, na.rm = TRUE)
by_theta$power_ratio <- with(by_theta, significant_t/nominalpower)
ggplot(data = by_theta, aes(x = spillover_interval)) +
  geom_smooth(aes(y = power_ratio), color = "#b2df8a",se = FALSE) +
  geom_smooth(aes(y = typeIIerror), color = "#D55E00",se = FALSE) +
  geom_smooth(aes(y = bias_t), color = "#0072A7",se = FALSE) +
  xlab('Simulated spillover interval (km)') +
  ylab('Performance of t-test')

The relationships between the simulated spillover interval and the corresponding proportion of the locations in the trial (Figure 7.2).

Fig 7.2 Proportion of locations in simulated spillover interval \(\color{green}{\textbf{----}}\) :zone defined by gamma_inp; \(\color{blue}{\textbf{----}}\) : zone defined by sd.

The spillover results in a loss of power, and increased negative bias in efficacy estimate, but these effects are rather small (Figure 7.3).

The potential for using the CRTanalysis() function to model the spillover and hence correct the naive efficacy estimate (from a t-test) can also be explored (see Use Case 5 and Multerer et al. (2021b).

Fig 7.3 Performance of t-test by spillover interval \(\color{purple}{\textbf{----}}\) : ratio of power:nominal power; \(\color{green}{\textbf{----}}\) :type II error rate; \(\color{blue}{\textbf{----}}\) : bias.